Integrated Defense Systems - The Purchasing System - St. Louis, MO
Special Purchase Order Condition (SPOC)

TOOLING AND TEST EQUIPMENT SPOCS

SPOC: 6001

REVISION DATE: 01-24-96 
**** OBSOLETE SPOC **** SPOC IDENTIFIED AS OBSOLETE ON 04-19-02
Special tooling or test equipment will not be transferred or destroyed without MDC'S authorization and will be retained at no cost to MDC for a period of seven (7) years after final shipment of the last production items unless directed otherwise by MDC.

SPOC: 6002

REVISION DATE: 01-24-96 3-23-01 5-10-01
In the performance of this contract, Seller is authorized to use special tooling and/or test equipment accountable under the Accountability Record Number identified below. Such tooling and/or test equipment is/are agreed to be suitable and adequate to support the peak monthly rate of production necessitated hereby, and no additional tooling and/or test equipment will be required for such production. Updates to Seller's property inventory (additions, deletions, modifications) are to be submitted in accordance with Form 5166 "The Boeing Company Property Control Accountability Requirements", and must reference the Accountability Record Number, consisting of an "A" prefix and the Seller's Responsible CAGE Code number, identifying Seller's site and property inventory which is

SPOC: 6004

REVISION DATE: 01-24-96 
**** OBSOLETE SPOC **** SPOC IDENTIFIED AS OBSOLETE ON 04-19-02
All tools, including inspection tools, shall be furnished by Seller.

SPOC: 6006

REVISION DATE: 01-24-96 
**** OBSOLETE SPOC **** SPOC IDENTIFIED AS OBSOLETE ON 04-19-02
Tooling produced or furnished hereunder is the property of MDC or the Government and will be used only for fabrication of MDC parts or assemblies. A detailed description and sketch or marked up blueprint will be submitted to MDC for planning and tool design approval prior to any rework or addition. Tools will be maintained current to the latest production configuration. MDC will determine when production capability for a superseded configuration must be retained and additional new tooling may be authorized. Discrepancies in MDC furnished tooling must be reported to MDC Tool Inspection Dept E820 on Tool Rejection Tag (MAC 407) 861C, and processed in accordance with MDC Quality Assurance Standard Practice 10.130 within thirty (30) days after receipt, if charges for restoration to tool design configuration are to be considered by MDC. Approval of Tool Completion Reports (TCR's), MDC Form 1500, and payment of invoices for new or reworked tools will be withheld until such tools have made acceptable parts. MDC field representative must approve the TCR for either new tooling or tooling rework of $1000.00 or more. In the event that inspection is not performed by MDC personnel, Seller will furnish at no cost to MDC, photographs of each tool, bearing the MDC assigned tool number. Tooling will not be destroyed, transferred or returned without MDC Form 2024/2024A initiated and authorized by the MDC buyer. Seller must include a copy of the MDC Form 2024/2024A with any tool shipment. The "Reason for Return" section must include the name of the buyer and the SMI Manufacturing Engineer. Failure to comply with these instructions will result in Seller being liable for freightcharges. Tooling will be retained at no cost to MDC for a period of seven (7) years after final shipment of the production items unless directed otherwise by MDC.

SPOC: 6008

REVISION DATE: 01-24-96 
**** OBSOLETE SPOC **** SPOC IDENTIFIED AS OBSOLETE ON 04-19-02
All tooling ordered hereunder will become the property of MDC and/or the Government. Invoices for said tooling will be paid by MDC only when the Tool Completion Report, MDC Form 1500, is received by the buyer and the first item made with the tooling is accepted by MDC. In addition, at no cost to MDC, said tooling is to be retained for a period of seven (7) years after final shipment ofpurchased items, and returned to MDC upon request, or disposed of as directed upon submittal of Inventory Schedule D, SF 1432.

SPOC: 6010

REVISION DATE: 01-24-96 
**** OBSOLETE SPOC **** SPOC IDENTIFIED AS OBSOLETE ON 04-19-02
Cost of tool maintenance for production hereunder shall be included inquoted part price and Seller shall bear such cost. Tool maintenance required by this special condition shall consist of the following: (A) replace tooling pins and keys as required. (B) repair elongated tooling holes and worn keyways. (C) clean and polish working surfaces of dies as required to prevent scoring or marking of parts. (D) protect entire die with anti-oxidant (everlube or equivalent) after each run of parts. (E) any other minor rework not to exceed three (3) man-hours. Cost of any tool rework or replacement which is not covered by the above shall be negotiated separately as the need arises.

SPOC: 6012

REVISION DATE: 01-24-96 
**** OBSOLETE SPOC **** SPOC IDENTIFIED AS OBSOLETE ON 04-19-02
Seller will build non-design tooling to support a production rate as specified below. Tooling will be stamped with tool letters and part number as described in MDC Form T-1.0, which will be supplied upon placement of order. Assembly operation sheet, process sheet or manufacturing outline will be returned with Tool Completion Report "TCR", MDC Form 1500. TCR will be provided by Seller the month of first delivery. Production rate capability of such tooling to be

SPOC: 6013

REVISION DATE: 01-24-96 
**** OBSOLETE SPOC **** SPOC IDENTIFIED AS OBSOLETE ON 04-19-02
Seller hereby grants to Buyer permission to use technical data supplied or to be supplied by Seller for the reprocurement of Support Equipment needed to assemble or disassemble Seller's equipment for maintenance and/or repair operations from Small/ Small Disadvantaged Business (S/SDB) concerns notwithstanding any proprietary or limited rights markings that may appear on said technical data. Seller also agrees that where drawings make reference to Seller's process specifications, Seller will supply copies of the referenced specifications or MIL. Spec. equivalent processes which will satisfy the production requirement. Buyer agrees that it will invoke reasonable restrictions on the S/SDB concerns to limit further disclosure or use of Seller's data by the S/SDB concern. This shall be Buyer's only duty to protect Seller's proprietary information and it shall be Seller's duty to enforce, by whatever means available to Seller, the protections obtained by Buyer for Seller.

SPOC: 6018

REVISION DATE: 01-24-96 
**** OBSOLETE SPOC **** SPOC IDENTIFIED AS OBSOLETE ON 04-19-02
Seller shall, at its expense, carry sufficient insurance to cover replacement cost of all MDC/Government owned tooling and/or special test equipment in its possession, including those tools that were MDC and/or Government furnished. Policies for such insurance shall be subject to approval by MDC and shall name MDC and/or the Government as the named insured or shall include a loss payable clause to MDC and/or the Government as their interest may appear.

SPOC: 6020

REVISION DATE: 01-24-96 
**** OBSOLETE SPOC **** SPOC IDENTIFIED AS OBSOLETE ON 04-19-02
Seller shall maintain MDC furnished tools and shall incorporate changes therein in accordance with MDC furnished MAC 207 forms.

SPOC: 6022

REVISION DATE: 01-24-96
Die equipment specified herein is the property of Seller but will be maintained in good condition by the Seller for MDC's and the Government's exclusive use for a period of not less than seven years after the last production of parts therefrom, including those from latest changes, except that in no event will Seller dispose of dies without written authorization from MDC. Seller shall provide MDC with tool completion report "TCR" form 1500, properly prepared when tooling charges are on purchase order. Payment of invoices will be held pending receipt of the first parts made from these tools.

SPOC: 6030

REVISION DATE: 01-24-96 
**** OBSOLETE SPOC **** SPOC IDENTIFIED AS OBSOLETE ON 04-19-02
Seller will fabricate the goods ordered under this contract in accordance with the MDC furnished B/P, tooling and MAC Form 1288 "Production Work Order".

SPOC: 6032

REVISION DATE: 01-24-96 
**** OBSOLETE SPOC **** SPOC IDENTIFIED AS OBSOLETE ON 04-19-02
Any discrepancy or conflict between MAC furnished developed template /DT/ and requirements of purchase order item description or special conditions shall be resolved prior to production of parts.

SPOC: 6034

REVISION DATE: 01-24-96
All MDC furnished tooling will be returned to MDC upon completion of this contract by Seller. Tooling will be packaged separate from hardware and packaging will be outwardly identified as tools only.

SPOC: 6036

REVISION DATE: 01-24-96 
**** OBSOLETE SPOC **** SPOC IDENTIFIED AS OBSOLETE ON 04-19-02
In the event that inspection of tooling fabricated under this contractis not performed by MDC personnel immediately upon completion of its fabrication, the Seller shall furnish 8 x 10 photographs, bearing the MDC assigned tool number, of each tool fabricated, at no charge to MDC. Approval of the Tool Completion Report "TCR", MDC Forms 1500, and payment of invoices will be withheld pending receipt of the photographs, and receipt and acceptance of the first parts made from these same tools.

SPOC: 6036A

REVISION DATE: 01-24-96 
**** OBSOLETE SPOC **** SPOC IDENTIFIED AS OBSOLETE ON 04-19-02
In the event that inspection of tooling fabricated under this contractis not performed by MDC personnel immediately upon completion of its fabrication, the Seller shall furnish 8 x 10 photographs, bearing the MDC assigned tool number, of each tool fabricated, at no increase in target cost. Approval of the Tool Completion Report "TCR", MDC Forms 1500, and payment of invoices will be withheld pending receipt of the photographs, and receipt and acceptance of the first parts made from these same tools.

SPOC: 6042

REVISION DATE: 01-24-96 
**** OBSOLETE SPOC **** SPOC IDENTIFIED AS OBSOLETE ON 03-02-94
AC Form 3342A "Supplier Accountability Requirements for Special Test

SPOC: 6045

REVISION DATE: 01-24-96 6-4-98
Navy gauges required in the performance of this contract, are available under one of the following conditions: Cond. 1. Currently at seller's facility from previous production Cond. 2. To be shipped to seller by the Dept. of the Navy, Pomona, CA Cond. 3. To be transferred to seller from previous field location If condition 1. applies, there is no seller action required. If condition 2. applies, acknowledge receipt of the gauges by completing blocks 7,8, 9 and 10 of the DD1348-1 Navy Shipping Document, or DD1149, which will accompany the delivered gauges. Forward one copy to: Department of the Navy Naval Weapons Station Seal Beach Pomona Annex P.O. BOX 2426 Code 373 Pomona, CA 91769-2426 An additional copy must be sent to: Attn: Government Property Admin. McDonnell Douglas Corp. P.O. BOX 516 St. Louis, MO 63166 If condition 3. applies, write acknowledgment of receipt on the generic shipping document or your company letterhead. Forward one copy to the McDonnell Douglas address only.

SPOC: 6054

REVISION DATE: 01-24-96 
**** OBSOLETE SPOC **** SPOC IDENTIFIED AS OBSOLETE ON 04-19-02
Seller shall produce tooling and assume responsibility for all tooling maintenance exclusive of MDC design changes sufficient to support a minimum production rate of

SPOC: 6058

REVISION DATE: 01-24-96 
**** OBSOLETE SPOC **** SPOC IDENTIFIED AS OBSOLETE ON 04-19-02
Tooling produced hereunder will be permanently marked for tool identification with the part number which is:

SPOC: 6060

REVISION DATE: 01-24-96 
**** OBSOLETE SPOC **** SPOC IDENTIFIED AS OBSOLETE ON 04-19-02
Tools produced hereunder are Government property and will be used only for the fabrication of parts and assemblies ordered by MDC or the Government. Tools supplied by MDC are MDC property and will be used only for the fabrication of parts and assemblies ordered by MDC. No such tooling is to be destroyed, disposed of, or transferred without written authorization from MDC or the Government. Invoices for tools fabricated to this contract will be payable at such time as Seller has obtained MDC approval of the Tool Completion Report, MDC Form 1500. The Tool Completion Report must contain the Seller assigned tool number, description of tool and the appropriate tool letter(s) as described in MDC Form T-1.0, attached hereto.

SPOC: 6062

REVISION DATE: 01-24-96
(A) In the performance of this contract Seller shall provide, at no direct charge to MDC, all common tooling and/or common test equipment, and shall be responsible for all periodic maintenance and refurbishmentor replacement required to manufacture, test and deliver the goods purchased by MDC. Such common tooling and/or common test equipment shall be owned by Seller and be of a design, type, quality and quantity adequate to support a peak monthly production rate of 12 ship/sets of equipment, etc., based on a one-shift eight-hour per day, five-day work week. In addition, such common tooling and/or common test equipment shall have a minimum production life and durability of fourteen (14) years. (B) If during the performance of this contract, it is necessary for the Seller to acquire additional common tooling and/or common test equipment and/or to modify existing common tooling and/or common test equipment, such action shall be accomplished at no cost to MDC. Accordingly, such common tooling and common test equipment costs will continue to be completely absorbed by Seller as its cost responsibility. (C) Seller shall retain common tooling and/or common test equipment required hereunder at no cost to MDC for a period of seven (7) years after shipment of the final item to be delivered under the last production order that may be placed by MDC. (D) In as much as Seller is absorbing all costs applicable to common tooling and/or common test equipment above, such costs shall not be recognized as direct costs in substantiating prices for any items under this contract.

SPOC: 6062B

REVISION DATE: 01-24-96
(A) In the performance of this contract Seller shall provide, at no direct charge to MDC, all common tooling and/or common test equipment, and shall be responsible for all periodic maintenance and refurbishmentor replacement required to manufacture, test and deliver the goods purchased by MDC. Such common tooling and/or common test equipment shall be owned by Seller and be of a design, type, quality and quantity adequate to support a peak monthly production rate of 11 ship/sets of equipment, etc., based on a one-shift eight-hour per day, five-day work week. In addition, such common tooling and/or common test equipment shall have a minimum production life and durability of fourteen (14) years. (B) If during the performance of this contract, it is necessary for the Seller to acquire additional common tooling and/or common test equipment and/or to modify existing common tooling and/or common test equipment, such action shall be accomplished at no cost to MDC. Accordingly, such common tooling and common test equipment costs will continue to be completely absorbed by Seller as its cost responsibility. (C) Seller shall retain common tooling and/or common test equipment required hereunder at no cost to MDC for a period of seven (7) years after shipment of the final item to be delivered under the last production order that may be placed by MDC. (D) Inasmuch as Seller is absorbing all costs applicable to common tooling and/or common test equipment above, such costs shall not be recognized as direct costs in substantiating prices for any items under this contract.

SPOC: 6064

REVISION DATE: 01-24-96 
**** OBSOLETE SPOC **** SPOC IDENTIFIED AS OBSOLETE ON 04-19-02
Any and all special tooling/special test equipment acquired for and heretofore accountable under this contract is authorized for transfer,via 1149/MAC 1205B and henceforth accountable under contract number

SPOC: 6072

REVISION DATE: 01-24-96
(A) In the performance of this contract and any subsequent contract, Seller shall provide all special tooling and/or special test equipment (including periodic maintenance, refurbishement and replacement) required to manufacture, test and deliver the items purchased by MDC. Such special tooling and/or special test equipment shall be of a design, type, quality and quantity adequate to support a peak monthly production rate of 4 ship sets of equipment (including the various types of spares, e.g., WRA's, SRA's, sub-SRA's, etc.) based on a one-shift, eight-hour per day, five-day work week. In addition, such tooling and/or test equipment shall have a minimum production life and durability of 14 years. (B) This special tooling and/or special test equipment shall also be of a design, type, quality and quantity capable of being expanded to support a peak monthly production rate of 12 ship sets of equipment (including the various types of spares, e.g., WRA's, SRA's, sub-SRA's, etc.), if an additional quantity of special tooling and/or special test equipment is subsequently purchased by MDC, through the exercise of an option or separate purchase, either at one time or incrementally from time to time. This monthly rate capability of 12 ship sets is also based on a one-shift, eight-hour per day, five-day work week and such special tooling and/or special test equipment shall have a minimum life and durability of 14 years. (C) Seller shall retain the special tooling and/or special test equipment required hereunder at no cost to MDC for a period of seven (7) years after shipment of the final item to be delivered under the last production order that may be placed by MDC. (D) This clause also assumes Seller's compliance with the requirements of MAC Form 3168A "Notice of Intent to Acquire Special Test Equipment" and other contract provisions affecting special tooling and/or special test equipment.

SPOC: 6072B

REVISION DATE: 01-24-96
(A) In the performance of this contract and any subsequent contract, Seller shall provide all special tooling and/or special test equipment (including periodic maintenance, refurbishement and replacement) required to manufacture, test and deliver the items purchased by MDC. Such special tooling and/or special test equipment shall be of a design, type, quality and quantity adequate to support a peak monthly production rate of 3 ship sets of equipment (including the various types of spares, e.g., LRU's, LRM's, sub-LRM's, etc.) based on a one-shift, eight-hour per day, five-day work week. In addition, such tooling and/or test equipment shall have a minimum production life and durability of 14 years. (B) This special tooling and/or special test equipment shall also be of a design, type, quality and quantity capable of being expanded to support a peak monthly production rate of 11 ship sets of equipment (including the various types of spares, e.g., LRU's, LRM's, sub-LRM's, etc.), if an additional quantity of special tooling and/or special test equipment is subsequently purchased by MDC, through the exercise of an option or separate purchase, either at one time or incrementally from time to time. This monthly rate capability of 11 ship sets is also based on a one-shift, eight-hour per day, five-day work week and such special tooling and/or special test equipment shall have a minimum life and durability of 14 years. (C) Seller shall contact the MDC Procurement representative for direction on disposition of ST/STE after the last production order is completed. (D) This clause also assumes Seller's compliance with the requirements of MAC Form 3168A "Notice of Intent to Acquire Special Test Equipment" and other contract provisions affecting special tooling and/or special test equipment.

SPOC: 6074

REVISION DATE: 01-24-96 
**** OBSOLETE SPOC **** SPOC IDENTIFIED AS OBSOLETE ON 04-19-02
All perishable tools are to be supplied by the Seller and are nonaccountable to MDA.

SPOC: 6076

REVISION DATE: 01-24-96 
**** OBSOLETE SPOC **** SPOC IDENTIFIED AS OBSOLETE ON 04-19-02
By acknowledgement of this contract, Seller certifies that on his property records, all below listed tooling, supplied and/or acquired on previous contracts, has been transferred to and is accountable on this contract from contract(s)/purchase order(s):