bug

Doing Business with Boeing
Approved Process Sources D1-4426
Revision: LM   Effective: 3/May/2021

 
Doing Business with Boeing Homespc
Closespc
Approved Process Sources D1-4426
d1-4426 Left Navigation
 
spacer Boeing Approved Process
spacerSources - Home spacer Nadcap Accreditation s Notes & Exceptions spacer Revision Summary spacerUser Instructions &
spacer Requirements spacer Approved Sources
spacerFlow Chart spacer Approved Processors spacer Geographic APL spacer Process Code Listing spacer Specification Index Listing spacer Limitation Index spacer Boeing Contacts spacer Authorized Distributors
spacer of Aircraft Bearings spacer Authorized Distributors
spacer of Designated Fasteners spacer Frequently Asked Questions spacer

Document D1-4426 - Processes for BE10048631






Detail Information for Processor Code number: BE10048631
Supplier Name: ISRAEL AEROSPACE INDUSTRIES LTD
Address:BEN GURION INTERNATIONAL, AIRPORT
City/town:LOD
Province/state: 7010000
Country:ISRAEL
Area:
Contact Name:Dana Cohen
Title:
Phone: 97239356152
Fax:

* An acronym in the "Nadcap Commodity" column only indicates that Nadcap accreditation may be required for this Process Code. It does not provide any indication of this company's actual Nadcap accreditation status.

Process Code *Nadcap
Commodity		 Limitation Codes Doc Notes Nomenclature Specification
Number
002 AQS None None Boeing approved QMS as defined in D1-4426 Processor Requirements Sec 6.16.2 Quality System
101 HT None None Heat Treat of Alloy Steels BAC 5617
111 HT None None Heat Treat of Aluminum Alloys BAC 5602
131 HT None None Heat Treat of Corrosion Resistant Steel BAC 5619
151 HT None None Heat Treat of Titanium and Titanium Alloys BAC 5613
220 WLD None . Resistance Welding - Steel Alloys BAC 5977
230 WLD None . Resistance Welding - Aluminum Alloys BAC 5977
301 CP None . Sulfuric Acid Anodize Type II (Approval Not Required for International Space Station (ISS) Houston Only) MIL-A-8625
302 CP None . Hard Anodize Type III MIL-A-8625
304 CP None . Chromic Acid Anodizing - Class 1 and 4 BAC 5019
308 CP None . Hard Anodizing - Class 1 and 2 BAC 5821
317 CP None . Chromic Acid Anodizing - Class 5 BAC 5019
321 CP None . Chemical Conversion Coatings for Aluminum (Immersion Application Only) BAC 5719
323 CP None Processing limited to touch-up application only. Application of Sol-Gel Conversion Coatings on Corrosion Resistant Alloys for Painting (Approval required for Spray, Manual and Immersion application excluding touch up due to post application operations) BAC 5665
340A CP None None Plating- Cadmium (Electrodeposited) AMS-QQ-P-416
400 NDT None None Magnetic Particle Inspection BAC 5424
410 NDT None None Penetrant Inspection BAC 5423
421 NDT None None Radiologic Inspection/Radiography (film) BSS 7041
421A No Nadcap Commodity Code None None Radiologic Inspection/Radioscopy BSS 7042
421C No Nadcap Commodity Code None None Radiologic Inspection - Digital Radioscopic BSS 7044
443 NDT C1 C3 None Nondestructive Inspection of Composite Parts - Structures BAC 5980
444 NDT None None NDI of Adhesive Bonds BAC 5968
500 SE None None Shot Peening BAC 5730
502 SE None . Shot Peening - Self Contained BAC 5730-2
510 CP None . Cleaning - Descaling of Titanium - Method II Only BAC 5753
533 CP None . Chemical Milling of Aluminum Type I and II (QPL) BAC 5772
540 COMP None None Metal to Metal (MM) Structural Bonding Class 1 per D-16925 (QPL) BAC 5514
541 COMP None None Honeycomb (HC) -Classes 3, 4, or 5 per D-16925 (QPL) BAC 5514
728 COMP None None Fiber Reinforced Composite Parts (QPL) BAC 5317
730 COMP None None Mfg. of High Temperature Resistant Epoxy Str. Parts (QPL) BAC 5317-3
732 COMP None None Mfg. of Adv. Composite Structural Parts 250F Cure (QPL) BAC 5317-5
734 COMP None None Manufacturing of Low Temperature Autoclave Cure Epoxy Structural Parts (QPL) BAC 5317-2
735 COMP None None Mfg. of Carbon Fiber Reinforced Adv. Composite parts (QPL) BAC 5578
802 MTL None . Mechanical Testing - Metallic Mech. Testing
803 MTL None . Metallurgical Testing Met. Testing
806 HT None . Temper Inspection of Non-ferrous Alloys (Conductivity Method including BAC 5651) BAC 5946
806A HT None None Hardness Testing BAC 5650
809 CP None . Process Solution Control Chem. Testing
810 CP None . Salt Spray Testing ASTM-B-117
811 WLD None . Welder Qualification MIL-STD-1595
815 MTL None . Chord Method for Microhardness Testing ARP1820
848A NDT None None NDI Personnel Certification Level 3 Magnetic NAS 410
849A NDT None None NDI Personnel Certification Level 3 Penetrant NAS 410
850A NDT None None NDI Personnel Certification Level 3 Radiographic NAS 410
851A NDT None None NDI Personnel Certification Level 3 Ultrasonic NAS 410
L111A HT None Excluding fog, spray, and polyalkalene glycol quenching. HT Aluminum - Wrought Materials DPS7.00-1
L204 WLD None . Fusion Weld DPS10.301
L304B CP None None Chromic Acid Anodizing - Chromate Sealed DPS11.01-3
L325 CP None None Coating-Multicolored Chemical Surface Treatment of Aluminum Alloys (Immersion Application Only) DPS9.45
L410 NDT None None Penetrant Inspection DPS4.707
L812 WLD None None Qualification of Fusion Welders & Welding Operators DPS 10.305
S101A HT None None HT Steel - Normalizing PS15000.3
S101B HT None None HT Steel - Normalizing & Tempering PS15000.4
S101C HT None None HT Steel - Hardening (<= 180 KSI) PS15000.5
S101D HT None None HT Steel - Hardening (>= 200 KSI) PS15000.6
S101G HT None None HT Steel - Annealing Stainless Steel & 18% Ni (Grade 250) PS15000.9
S101J HT None None HT Hardening PH Grade Stainless Steel to H Condition PS15000.11
S101K HT None None HT Hardening PH Gr Stainless Steel to CH900/CA 850 Condition PS15000.12
S101L HT None . HT Hardening PH Grade Stainless Steel to RH Condition PS15000.13
S101M HT None . HT Hardening PH Grade Stainless Steel to TH Condition PS15000.14
S101N HT None . HT Steel - Annealing PS15000.15
S103A No Nadcap Commodity Code None . HT Steel - Stress & Embrittlement Relief PS15063
S103B HT None None HT Steel - Hardening 440C PS15149
S103C HT None None HT Steel - Hardening & Cold Stabilization 440C (includes PS15326) PS15151
S103E HT None . HT Steel - Vacuum Hardening & Cold Stabilization 440C PS15159
S103F HT None None HT Steel - HP9Ni-4Co-.30C (220 - 240 KSI) PS15165
S103M HT None None HT Steel - Hardening 300M (280 - 300 KSI) PS15296
S103S HT None None Vacuum Processing of Metals PS15325
S111 HT None . Heat Treating for Aluminum Alloys PS15500
S141 HT None None HT Nickel, Cobalt, and Super Alloys PS15600
S151 HT None . HT Titanium PS15800
S151A No Nadcap Commodity Code None None Stress Relief Procedure - Titanium Alloys PS15807
S200 WLD None . Fusion Welding - Steel PS22250
S210 WLD None . Fusion Welding - Aluminum PS22201
S214 WLD None . Fusion Welding - Titanium PS22240
S220 WLD None . Resistance Welding - Spot - Seam PS22000
S230 WLD None . Resistance Welding - Aluminum PS22010
S248 WLD None . Electron Beam Welding PS22300
S281 No Nadcap Commodity Code None . Cadmium - Vacuum PS13145
S304 CP None None Anodizing Aluminum PS13201
S306 CP None . Hard Coat - Aluminum PS13208
S325 CP None . Coating - Multicolored Chemical Conversion of Aluminum Alloys by Immersion PS13209
S341 CP None None Cadmium Plating PS13101
S347 CP None None Brush Plating PS13113
S348 CP None None Cadmium Plating - Low Embrittlement PS13144
S351 CP None None Chromium Plating PS13102
S361 CP None None Nickel Plating PS13112
S364 CP None None Electroless Nickel Plating PS13105
S391 CP None Class 15 & 16. Application - Dry Film Lubricant PS18021
S400 NDT None None Magnetic Particle Inspection PS21201
S410A NDT None None Penetrant Inspection - Aluminum PS21202
S410D NDT None None Penetrant Inspection - Copper PS21202
S410E NDT None None Penetrant Inspection - Low Alloy Steels PS21202
S410H NDT None None Penetrant Inspection - Stainless Steels PS21202
S410J NDT None None Penetrant Inspection - Titanium PS21202
S421 NDT None None Radiographic Inspection PS21206
S421A NDT None None Radiographic Inpsection - Metallic Honeycomb Assys PS21206.1
S430 NDT None None Ultrasonic Inspection PS21211
S430A NDT None . Ultrasonic Inspection - Welds PS21211.1
S430D NDT None None Ultrasonic Inspection - Honeycomb / Composites Structure PS21211.4
S430E NDT None None Ultrasonic Inspection - Metal Bond / Brazed Honeycomb PS21211.5
S441 CP None None Temper Etch Inspection PS21205
S466A NDT None None Ultrasonic Resonsance Inspection - Honeycomb / Composites PS21244
S500 SE None None Peening PS14023
S531 CP None None Chemical Milling PS20022
S703 COMP None None Fabrication - Aluminum Honeycomb / Boron Skin PS14081
S707 COMP None None Laminate Fabrication - Boron / Epoxy PS14130
S712A COMP None None Carbon Epoxy Structural Skin- Fab and Acceptance of PS14196
S712B COMP None None Carbon Epoxy Structural Skins Al Honeycomb Core- Fab and Acceptance of PS14197
S806A HT None None Eddy Current Determination of Electrical Conductivity for Aluminum Alloys PS21207
S806B HT None None Hardness Testing of Parts and Materials PS21203
T111A HT None . Aluminum Heat Treatment Procedures C17 DPS7.00-1-17
Untitled Document
Copyright ©2010 The Boeing Company - All rights reserved Security Agreement