bug

Doing Business with Boeing
Approved Process Sources D1-4426
Revision: LM   Effective: 3/May/2021

 
Doing Business with Boeing Homespc
Closespc
Approved Process Sources D1-4426
d1-4426 Left Navigation
 
spacer Boeing Approved Process
spacerSources - Home spacer Nadcap Accreditation s Notes & Exceptions spacer Revision Summary spacerUser Instructions &
spacer Requirements spacer Approved Sources
spacerFlow Chart spacer Approved Processors spacer Geographic APL spacer Process Code Listing spacer Specification Index Listing spacer Limitation Index spacer Boeing Contacts spacer Authorized Distributors
spacer of Aircraft Bearings spacer Authorized Distributors
spacer of Designated Fasteners spacer Frequently Asked Questions spacer

Document D1-4426 - Processes for BE10386535






Detail Information for Processor Code number: BE10386535
Supplier Name: IAC MANUFACTURING M SDN BHD
Address:NUMBER 9 JALAN TU 45, TAMAN PERINDUSTRIAN TASIK UTAMA
City/town:AYER KEROH
Province/state: 75450
Country:MALAYSIA
Area:
Contact Name:Taku NISHIWAKI
Title: Quality Assurance
Phone: 606-2322062
Fax:606-2322067

* An acronym in the "Nadcap Commodity" column only indicates that Nadcap accreditation may be required for this Process Code. It does not provide any indication of this company's actual Nadcap accreditation status.

Process Code *Nadcap
Commodity		 Limitation Codes Doc Notes Nomenclature Specification
Number
003 AQS None None Boeing approved QMS as defined in D1-4426 Processor Requirements Sec 6.16.3 Quality System
305 CP None None Chromic Acid Anodizing - Class 1 and 3 BAC 5019
315 CP None None Boric Acid - Sulfuric Acid Anodizing Class 1 BAC 5632
317 CP None None Chromic Acid Anodizing - Class 5 BAC 5019
318 CP None None Boric Acid - Sulfuric Acid Anodizing Class 5 BAC 5632
392 CP None None Application Corrosion Resistant Finish for Integral Fuel Tanks - manual touch-up excluded for requiring approval BAC 5793
410 NDT None None Penetrant Inspection BAC 5423
410A NDT None None Liquid Penetrant Inspection BSS 7039
500 SE None Facility of shot peen is located at satellite location: No. 1, Jalan T.U. 50 Taman Perindustrian Tasik Utama Ayer Keroh, Melaka, 75450, Malaysia. Shot Peening BAC 5730
502 SE None Facility of shot peen is located at satellite location: No. 1, Jalan T.U. 50 Taman Perindustrian Tasik Utama Ayer Keroh, Melaka, 75450, Malaysia. Shot Peening - Self Contained BAC 5730-2
803 MTL None None Metallurgical Testing Met. Testing
809 CP None None Process Solution Control Chem. Testing
810 CP None None Salt Spray Testing ASTM-B-117
849A NDT None Consultant Level 3 is Mr. Sim Boon Tiong who is not a direct employee of IAC Mfg but is certified as their Responsible Level 3 in their QMS. NDI Personnel Certification Level 3 Penetrant NAS 410
Untitled Document
Copyright ©2010 The Boeing Company - All rights reserved Security Agreement